If your organization already has a workplace violence prevention plan on file, the next question is whether it covers the risks at every location and gives employees clear procedures to follow.
SB 553 made written plans a requirement effective July 1, 2024, and a permanent Cal/OSHA standard is due by December 31, 2026. For facilities and security managers, having a document on file is only the starting point.
A workplace violence prevention plan California employers must maintain covers five key areas: a written plan, site-specific hazard assessment and correction, a violent incident log, employee training, and records retained for the periods the statute specifies. Nearly all California employers are covered, subject to specific exemptions.
This guide helps you review your existing workplace violence prevention plan in California against current SB 553 requirements, identify gaps across multiple sites, and prepare for potential changes under the permanent Cal/OSHA standard.
Who Needs a Workplace Violence Prevention Plan in California?
Under California SB 553, which amended Labor Code Section 6401.7 and added Labor Code Section 6401.9, nearly all employers must establish and maintain a written workplace violence prevention plan.
If you manage facilities or physical security for a school district, retail chain, credit union, church, or multi-site office organization, the requirement generally applies to your workplaces unless a specific statutory exemption covers them.
A workplace violence prevention plan California employers maintain must address the hazards and corrective measures relevant to each work area and operation. For organizations with multiple locations, this means assessing the risks at each site rather than relying on one generic plan for the entire organization.
Who Is Exempt From SB 553?
Labor Code Section 6401.9 specifies exemptions for certain employers, employees and workplaces. These include:
- Qualifying healthcare facilities and operations covered by Cal/OSHA's separate healthcare workplace violence standard under Title 8, Section 3342.
- Certain small, non-public workplaces with fewer than 10 employees working at the location at any given time, provided the workplace is not accessible to the public and meets the applicable Injury and Illness Prevention Program (IIPP) requirements.
- Certain remote workers who telework from a location of their choice that is not under the employer's control.
- Qualifying corrections and law enforcement operations, subject to the specific conditions in the statute.
These exemptions have specific conditions. Before excluding a location or employee group from your workplace violence prevention plan California compliance process, review the exact wording of Labor Code Section 6401.9 and consult legal counsel where necessary.
The Four Types of Workplace Violence Under SB 553
The law classifies workplace violence into four types based on the person involved and their relationship to the workplace. Identifying which types may affect each location helps facilities and security managers assess hazards and determine appropriate controls.
These categories come from California Labor Code Section 6401.9. A workplace may face more than one type of violence, and the risks can vary by location. For example, a retail store may need to assess robbery risks, while a school may need to consider threats involving visitors or students.
Use these categories to inform each site's hazard assessment and the controls documented in the plan.
What a California Workplace Violence Prevention Plan Must Include
Under California Labor Code Section 6401.9, employers must establish, implement, and maintain an effective written workplace violence prevention plan. The plan must be accessible to employees and address hazards and corrective measures specific to each work area and operation. It can be a separate document or a dedicated section of the organization's Injury and Illness Prevention Program (IIPP).
For facilities and security managers, the key is translating these requirements into procedures employees can follow and teams can maintain across locations. The table below summarizes the required elements and the teams that typically help manage them.
Source: California Labor Code Section 6401.9. Role assignments are illustrative and may vary by organization.
Why the Plan Must Be Specific to Each Site
A company-wide policy does not replace site-specific hazard assessments and corrective measures. Under SB 553, the plan must address the hazards specific to each work area and operation.
For example, a school may need visitor access controls and threat-response procedures, while a credit union may need robbery-response procedures and a reliable way for employees to summon help. An office with limited after-hours reception coverage may need different alerting procedures from one staffed throughout the day.
For multi-site organizations, each location's plan should identify how employees report threats, how alerts reach responders, how emergency response is coordinated, and who owns corrective actions.
Facilities, security, HR, and EHS should coordinate these responsibilities. HR or EHS may oversee the program, while facilities and security teams typically support site assessments, access controls, emergency procedures, and corrective actions.
The Violent Incident Log
Under SB 553, covered employers must maintain a violent incident log documenting each workplace violence incident, including incidents that do not result in injury.
Under Labor Code Section 6401.9, each entry must record information based on statements from employees who experienced the incident, witness statements, and investigation findings. Required details include:
- Incident details: Date, time, location, and type of workplace violence.
- Incident description: A detailed account of what happened and the circumstances surrounding the incident.
- People involved: The classification of the person who committed the violence and the relevant circumstances, without personal identifying information that could reveal the person's identity.
- Incident characteristics: Relevant details such as a physical attack, threat, weapon involvement, or other circumstances specified by the law.
- Injuries and consequences: The nature of any injuries, other consequences, and any law enforcement involvement.
- Security measures and response: What measures were in place and what steps were taken to protect employees from further threats or hazards.
- Corrective actions: Actions taken to address the incident and help prevent similar incidents.
- Log completion details: The name and job title of the person completing the log and the date it was completed.
Who Should Maintain the Log?
For a workplace violence prevention plan that California employers can implement effectively, it’s critical to assign responsibility at each site.
- Site manager or designated employee: Records the incident and gathers initial reports.
- Security team: Provides relevant incident details and reviews available camera footage.
- HR or EHS: Supports investigation, documentation, and follow-up corrective actions.
Operational consideration: Record incidents promptly while details are still available. Delays can lead to incomplete accounts, missing information, and gaps between witness reports and security footage.
SB 553 Training Requirements
California SB 553 requires workplace violence training when the plan is first established, annually thereafter, and whenever a new or previously unrecognized hazard is identified or changes are made to the plan. Training is not a one-time onboarding task but an ongoing requirement regardless of whether an incident has occurred.
What Must Workplace Violence Training Cover?
- The employer’s workplace violence prevention plan: How employees can get a copy at no cost, how they can participate in developing and implementing it, and how it applies to their specific work area.
- The law itself: The definitions and requirements of Labor Code Section 6401.9.
- Incident reporting: How to report workplace violence incidents or concerns to the employer or law enforcement without fear of retaliation.
- Job-specific hazards and prevention: Hazards relevant to employees' roles, corrective measures in place, how to get assistance, and strategies to avoid physical harm.
- The violent incident log: What it is, what gets recorded, and how employees can obtain copies of the records specified by the law.
- Interactive questions: An opportunity to ask questions and get answers from someone knowledgeable about the employer's plan, covered in more detail below.
Many employers also cover warning signs of escalating behavior, situational awareness, and the site's emergency response procedures, including how alerts are issued, how to evacuate or shelter in place, and how to contact security or law enforcement. These topics are not on the statute's list, but they help employees act on the plan at their own location.
What Does the Interactive Training Requirement Mean?
Training must give employees an opportunity to ask questions and receive answers from someone who understands the employer's specific plan. Simply distributing a document or presenting general safety information does not, by itself, address this requirement.
For multi-site organizations, designate someone who can answer questions about each site's procedures, including how employees report threats, raise an alarm, contact security, and follow evacuation or shelter-in-place instructions.
Practical check: Before each annual training cycle, confirm that the content reflects current site hazards, corrective measures, reporting procedures, and emergency response arrangements. When the plan changes or a new hazard is identified, provide additional training on the relevant changes rather than waiting for the next annual session.
Recordkeeping Requirements
Training records must include the training dates, content or session summary, trainers' names and qualifications, and attendees' names and job titles. Incident investigation records must not contain medical information as defined by California law. The table below summarizes the required retention periods for each record type.
Who Can Access These Records?
Employees and their representatives must be given access, free of charge, to hazard assessment and correction records, training records, and violent incident logs within 15 calendar days of a request.
Cal/OSHA must be given access to all records covered by the statute upon request.
For a workplace violence prevention plan managed across multiple sites, assign responsibility for storing and retrieving records at each location. Keep the records organized by site so they can be retrieved within the required timeframe.
What Changes When Cal/OSHA Adopts Its Standard?
Current status: SB 553 California requirements are enforceable today. The permanent Cal/OSHA standard for general industry is still being developed through the rulemaking process.
California Labor Code Section 6401.9 requires the Occupational Safety and Health Standards Board (OSHSB) to adopt a permanent workplace violence prevention standard for general industry by December 31, 2026. This is the statutory adoption deadline, not a guarantee that a new standard will take effect the following day.
What Could Change Under the Proposed Standard?
The proposed Title 8, Section 3343 standard could add more specific requirements beyond those in current SB 553. Cal/OSHA's 2026 discussion drafts identify areas that facilities, HR, and EHS teams should monitor; the most recent, dated September 2026, went to an advisory meeting on October 27, 2026. These provisions remain proposed, not final requirements, and may change during rulemaking.
- Narrower hazard language: The drafts narrow the hazard language from earlier versions, with more specific guidance on what qualifies as a hazard requiring assessment and correction under a California workplace violence prevention plan.
- Remote training: Employees taking training remotely must have questions answered by a knowledgeable person within one business day. That is a tighter standard than the current statute’s interactive requirement, which does not specify a response window.
- Trauma counseling: A trauma counseling provision requires employers to address the psychological aftermath of a workplace violence incident as part of post-incident response. This is an addition to, not a replacement for, the existing post-incident investigation requirement.
- Broader record access: Employee access to records would extend to investigation materials, which goes beyond what Labor Code 6401.9 currently requires.
What Should Employers Do Now?
For organizations maintaining a workplace violence prevention plan shaped by SB 553, the immediate priority is to meet current legal requirements while monitoring the rulemaking process.
Facilities and security managers should check that:
- Site-specific hazard assessments are documented and reviewed.
- Emergency procedures are operational and reflect each location's needs.
- Employees know how to report incidents and raise an alarm.
- Training and recordkeeping requirements are being met.
- Incidents are investigated, logged, and followed by appropriate corrective actions.
- The organization has a process for reviewing the final standard and updating the plan if necessary.
Where Physical Security Fits in the Plan
A workplace violence prevention plan sets out the requirements. Physical security procedures make them operational at each site. The facilities and security team plays a key role in assessing hazards, managing access, coordinating alerts, and investigating incidents.
1. Site Hazard Assessments
During a site walk, inspect the conditions and work practices that could expose employees to violence. Review:
- Entrances and reception: Uncontrolled access, blind spots, visitor sign-in procedures, and staff exposure to visitors.
- Parking and after-hours areas: Poor lighting, limited staffing, and restricted visibility.
- Cash-handling areas: Employee exposure during transactions or transfers.
- Isolated work areas: Locations where employees work alone or cannot readily summon assistance.
Document identified hazards, assign corrective actions, and track completion. Record the findings for the relevant location and confirm that assigned actions are completed. Hazard identification, evaluation, and correction records must be retained for five years under the statute.
The assessment should reflect each site's layout, operations, staffing, and access arrangements.
2. Employee Alerting
The plan must explain how employees can alert others to the presence, location, and nature of an emergency and how they can obtain help from security or law enforcement. The alerting procedure should specify who receives the alert and what happens next. A phone call to the front desk may be ineffective if the incident occurs there.
Depending on the site's risks, controls may include silent panic buttons for offices or wearable panic buttons for employees. The chosen method should communicate the employee's location, reach the appropriate responders, and allow an employee to raise an alarm without speaking when necessary.
3. Access Control and Visitor Management
Access procedures should define which entrances are authorized, how visitors are checked in and badged, and how staff should respond when a known threat or a person subject to a restraining order is identified.
For facilities and security teams, this includes reviewing door access permissions, reception procedures, visitor records, and how relevant threat information is communicated to the people responsible for responding.
Controls should reflect the site's use: a school, credit union, retail store, and corporate office will not have identical access requirements. Visitor management procedures should be documented for each site and reflect how visitors enter, are verified, and are monitored.
4. Emergency Response Coordination
The plan must establish procedures for alerting employees, evacuating or sheltering in place, and obtaining assistance from designated staff, security, or law enforcement.
For each location, document who directs the response, who serves as backup, how instructions reach employees, and how responders are contacted. Confirm that the procedures account for the building layout, staffing arrangements, and available communication systems. The response procedure at headquarters may not work at a satellite office with a different floor plan, staffing level, or law enforcement response arrangement.
Check each site's emergency post orders against the written plan. They should identify who can initiate a lockdown or shelter-in-place procedure, how instructions reach employees, who contacts emergency responders, and who takes over if the primary response lead is unavailable. Update the post orders when site layouts, staffing, or response arrangements change.
At a single-site organization, the responsible person should be clearly identified. At a multi-site organization, each location needs a named person and a backup.
5. Post-Incident Investigation
The investigation following an incident supports two requirements: completing the violent incident log and documenting hazard corrections. Security teams can reconstruct events using camera footage, access logs, witness accounts, and other available evidence to identify what happened and what needs to change.
Collect this information promptly, before footage is overwritten or witness recollections fade. Assign responsibility for the investigation at each site before an incident occurs.
6. Applying the Plan Across Multiple Sites
A workplace violence prevention plan California employers maintain must address hazards and corrective measures specific to each work area and operation. A company-wide policy can set consistent procedures, but each location needs its own assessment, alerting arrangements, access controls, and response responsibilities.
For facilities and security managers, the task is to document these arrangements, assign owners to identify hazards, and verify that corrective actions are completed.
How Coram Supports a California Workplace Violence Prevention Plan
The emergency response, hazard correction, and post-incident investigation elements of a workplace violence prevention plan are the ones facilities and security teams have to operate. Coram supports these operational elements across multi-site organizations.
Emergency Management
Coram Emergency Management supports the alerting and coordination procedures a plan needs to put into practice.
- Panic buttons send an alert with the location assigned to the button, whether that is a site, a building, or an area, and the alert names which button was pressed, helping responders understand where assistance is needed.
- Mobile and web alerts notify staff with location context, and an emergency chat keeps responders coordinated while the incident is active. Coram keeps a timestamped history of emergencies that can be exported to CSV to support incident review and record-keeping.
- Where Automatic Dispatch is turned on for an emergency type, Coram automatically shares the emergency details and location with a trusted dispatch partner, who notifies 911. A Site Admin turns it on per emergency type, and it covers locations in the 50 US states and Washington, D.C.
- Drill Mode lets teams practice the activation sequence with alerts marked as drills. During a drill, panic buttons don't auto-dispatch, the Call 911 button is blocked, and linked door Response Plans don't fire. Drills appear in the emergency history export, flagged as drills, which can support training documentation and after-action reviews.
What Connects to Emergency Management?
- Access Control lets a security lead lock or unlock chosen doors or door groups from one place during an active incident through Response Plans, supporting the site's documented lockdown and access procedures.
- Guest Management supports front-desk visitor check-in and can run background checks covering criminal records and sex offender registries, and match visitors against the organization's own list of people who are not permitted on site, helping teams act on their documented access and response procedures.
- Video Security helps teams review footage to reconstruct an incident and gather information for the violent incident log, investigation, and hazard correction process.
- Firearm Detection works with compatible existing cameras. When a firearm is detected, authorized staff can confirm the alert to start an emergency, and the video clip is added to the emergency chat.
Together, these capabilities can support the emergency response, access control, visitor management, and post-incident investigation procedures that facilities and security teams help put into practice at each site.
Coram does not write a workplace violence prevention plan or make an employer compliant with SB 553 or any future Cal/OSHA standard. Employers remain responsible for developing, implementing, and maintaining their plans. Coram supports the operational processes teams use to carry out the procedures documented in those plans.
FAQ
Is a workplace violence prevention plan required in California?
Yes. Under SB 553, most California employers must establish, implement, and maintain a written workplace violence prevention plan under Labor Code Section 6401.9. The requirement has been enforceable since July 1, 2024, and the plan must address hazards and corrective measures specific to each work area and operation.
Which employers are exempt from SB 553?
Labor Code Section 6401.9 specifies exemptions for certain employers and workplaces, including qualifying healthcare facilities covered by Cal/OSHA's separate healthcare workplace violence standard. Other exemptions depend on the specific statutory provisions and circumstances, so employers should check the current law before assuming their workplace is excluded.
What does workplace violence include under SB 553?
SB 553 defines workplace violence as an act or threat of violence occurring at a place of employment. It includes threats or use of physical force, incidents involving firearms or other dangerous weapons, and four categories of violence: by someone with no legitimate business at the workplace, by a customer or person served, by a current or former employee, and by someone with a personal relationship with an employee. Lawful self-defense and defense of others are excluded from the definition.
What is a violent incident log under SB 553?
A violent incident log records workplace violence incidents and must be based on information from affected employees, witness statements, and investigation findings. Entries include the date, time, and location; the type and description of the incident; the classification of the person who committed the violence; relevant circumstances and consequences; and the steps taken to protect employees and address hazards. The log must exclude personal identifying information that could reveal the identity of anyone involved.
Which records must be kept for five years under SB 553?
Employers must retain records of workplace violence hazard identification, evaluation, and correction; violent incident logs; and workplace violence incident investigations for at least five years. Training records must be retained for at least one year, not five. Employees and their representatives may request access to the records specified in the statute, while Cal/OSHA may request all records covered by the recordkeeping requirements.
How often is workplace violence training required in California?
Workplace violence training is required when the plan is first established and annually thereafter. Additional training is required when a new or previously unrecognized hazard is identified or changes are made to the plan. Employees must have the opportunity to ask interactive questions and receive answers from someone knowledgeable about the employer's plan.
When does the new Cal/OSHA workplace violence standard take effect?
Labor Code Section 6401.9 requires the Occupational Safety and Health Standards Board to adopt a permanent general-industry workplace violence standard by December 31, 2026. That is the statutory adoption deadline, not a confirmed effective date of January 1, 2027. Employers should check the official Cal/OSHA rulemaking page for the latest draft and adoption updates. Until a new standard is adopted, the existing SB 553 requirements remain in force.






